Added to cart
    Continue shopping »

    665246-B21 HPE Ethernet 10Gb 2-port 560M Adapter G9 G10

    this product is refurbished
    € 55,00 Excl. VAT
    Available immediately
    Part number: 665246-B21
    • Model: HPE Ethernet 10Gb 2-Port 560M Adapter
    • Form Factor: Type A Mezzanine Card
    • Interface (Bus) Type: PCI Express 2.0 (Gen 2) x8
    • Network Processor: Intel® 82599 Controller
    • Data Rate: Two ports
    • each at 20 Gbps bi-directional; 40 Gbps aggregate bi-directional theoretical bandwidth
    • Our Refurbished products have been tested and are in A-grade condition (unless stated otherwise)
    • Photos are indicative and may differ.

    Disclaimer: Product photos and specifications are provided by Universal Databases and are often based on new products. Photos are indicative, SpareIT tries to show this as accurately as possible.
    Please pay close attention to the product description and contact us if you have any questions.


    MPN: 665246-B21

    Option Part Number: 665246-B21
    Spare Part Number: 669282-001

    General Specifications

    Device Type: Network Adapter - Dual Port
    Model: HPE Ethernet 10Gb 2-Port 560M Adapter
    Form Factor: Type A Mezzanine Card
    Interface (Bus) Type: PCI Express 2.0 (Gen 2) x8

    Networking / Technical Specifications

    Network Processor: Intel® 82599 Controller
    Data Rate: Two ports, each at 20 Gbps bi-directional; 40 Gbps aggregate bi-directional theoretical bandwidth
    Connectivity Technology: Wired
    Data Link Protocol: GigE, 10 GigE
    Data Transfer Rate: 10 Gbps
    Features: Wake on LAN (WOL), Quality of Service (QoS), Jumbo Frames support, Virtual Machine Device Queues (VMDq), Teaming Support, PXE Support, Receive Side Scaling (RSS), Single Root I/O Virtualization (SR-IOV), Tagged VLAN, Extended Message-Signaled Interrupts (MSI-X)

    Expansion & Connectivity

    Compatible Slots: 1 x Expansion Slot

    Compliance Standard

    IEEE Compliance: 802.3, 802.1ab, 802.3x, 802.3ad, 802.3p/802.1q, 802.3ae, 802.1qau, 802.3ap, 802.1as, 802.1qaz, 802.1Qbb
    RoHS Compliance 6 of 6

    Processor / Memory

    Processor: 1 - Intel® 82599 Controller

    Software / System Requirements

    Operating System and Virtualization Support: Microsoft Windows Server 2012; Microsoft Windows Server 2008 SP2, R2 (x86, x64); Microsoft Windows Hyper-V, R2 SP1; Red Hat Enterprise Linux (RHEL) 5.7, 6.1 (x86, EM64T/AMD64); SUSE Linux Enterprise Server (SLES) (x86, EM64T/AMD64); VMware ESX/ESXi 4.1u2, ESXi 5.0u1, ESXi 5.1.; vSphere 6.5; Citrix XenServer 6.0; Solaris 10 (x86, x64)

    Power Requirements

    Power Consumption: 6.5 Watt Maximum

    Product Dimensions & Weight

    Width: 8.25 inch
    Height: 2.50 inch
    Depth: 9.78 inch
    Weight: 1.00 lbs

    Environmental Parameters

    Min Operating Temperature: 32 °F (0°C)
    Max Operating Temperature: 131 °F (55°C)
    Operating Humidity Range: 10 - 90% (Non-Condensing)

    Agency Approvals

    USA: FCC (CFR 47 part 15) and UL 60950
    Canada: ICES-003 and CSA60950
    Japan: VCCI
    European Union: EN55022:1998 (CISPR 22), EN55024:1998 and IEC60950:1999 (EN60950:2000)
    Australia: ACA, AS/NZS3548/EN55022:1998, EN55024:1998
    Korea: MIC (RRL), EMC Registration

    NOTE: The HPE 560M on each server blade connects to a 10Gb interconnect in bays 3-8 (HPE BladeSystem C7000 Enclosure) or bays 2-4 (HPE BladeSystem C3000 Enclosure).

    NOTE: This adapter requires a minimum of 2 GB of server memory.

    Compatibility Information

    Designed for

    HPE ProLiant BL Series: BL460c Gen9 Server Blade, BL660c Gen9 Server Blade, BL460c Gen10 Server Blade

    HPE ProLiant WS Series: WS460c Gen9 Server Blade

    NOTE: Thermal reporting for Gen10 is in server design not in adapters.

    HPE Blade Switch: 6120XG Blade Switch, 6120G/XG Blade Switch, 6125G/XG Ethernet Blade Switch, 6125XLG Ethernet Blade Switch, 6127XLG Ethernet Blade Switch and GbE2c Layer 2/3 Ethernet Blade Switch

    HPE Ethernet BL-c Switch: 1:10Gb Ethernet BL-c Switch

    Cisco Catalyst Blade Switch for HPE: 3120G Blade Switch, 3120X Blade Switch and 3020 Blade Switch

    Cisco Fabric Extender for HPE: B22HP

    HPE Pass Thru Module: 10GbE Pass-Thru Module and 1GbE Pass Thru Module

    NOTE: 10GbE converged connectivity is supported in all HPE 6120XG, HPE 6125XG series switches, Cisco B22 Fabric Extender and HPE 10GbE Pass-Thru modules. All other supported interconnects and switches are limited to 1GbE per connection for Ethernet-ony traffic.

    NOTE: Refurbished products have a warranty period of 90 days.


    Other features
    Harmonized System (HS) code 85176990
    Compatible products ProLiant BL420c Gen8ProLiant BL460c Gen8ProLiant BL465c Gen8ProLiant BL660c Gen8
    Power consumption (typical) 6.5 W
    Networking standards IEEE 802.1p, IEEE 802.1Q, IEEE 802.3, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3x
    Ethernet LAN data rates 10000 Mbit/s
    Ethernet LAN Y
    Chipset Intel® 82599
    Data transfer rate (max) 10000 Mbit/s
    Ports & interfaces
    Ethernet LAN (RJ-45) ports 2
    HDD interface Ethernet
    Host interface PCI Express
    Internal Y
    Connectivity technology Wired
    Show more

    Kempenbaan 34
    5121 DM Rijen
    The Netherlands

    P. +31 (0)161 22 61 41

    CoC. 18080985
    VAT. NL8152.36.700.B01

    Subscribe for our newsletter

    Stay informed through our newsletter