817753-B21HP HPE Ethernet 10/25Gb 2-port 640SFP28 MCX4121A-ACUT Adapter - G9 G10 - HPB
- Ethernet 10/25Gb 2-port 640SFP28 adapter
- PCIe card form-factor
- Has two dual 10/25Gbe SFP28 ports capable of 50 Gbps bi-directional
- 100 Gb/s aggregate bi-directional theoretical bandwidth
- Requires one x8 PCI (Gen 8) Express slot
- With only High-Profile Bracket (HPB)
- Photos are indicative and may differ. SpareIT tries to represent this as correctly as possible.
Disclaimer:
Product photos and specifications are made available by Universal Databases and are often based on new products.
When the item is a 'Refurbished product' it has been tested by us and has an A-grade condition (unless otherwise stated). Refurbished items do not include cables, software media and manuals (unless otherwise stated).
Please read the product description carefully and contact us if you have any questions.
Description
Stuck in network traffic at 10Gbps? Time to take the Express Lane with HPE 25GbE Adapters. Current approaches to managing the increasing data center traffic require higher bandwidth and is cost prohibitive, restricting organizations from easily growing as their needs grow. Legacy technologies are struggling to handle the increased throughput and lack the capabilities to cost-effectively scale. FOption Part Number: 817753-B21
Spare Part Number: 840140-001
General
Device Type: Network adapter
Form Factor: Plug-in card - low profile
Interface (Bus) Type: PCI Express 3.0 x8 / PCI Express 3.0 x4
PCI Specification Revision: PCIe 3.0
Networking
Ports: 25 Gigabit Ethernet x 2
Connectivity Technology: Wired
Data Link Protocol: 10 GigE, 25 Gigabit LAN
Data Transfer Rate: 25 Gbps
Performance: Bidirectional throughput: 100 Gbps, Bandwidth per port: 50 Gbps
Capacity: Jumbo frame size: up to 9.6 KB
Remote Management Protocol: SNMP
Status Indicators: Link/activity
Features: VLAN support, IPv6 support, full duplex mode, TCP/IP offloading, Quality of Service (QoS), Jumbo Frames support, IPv4 support, PXE support, LACP support, LLDP support, Large Send Offload (LSO), Receive Side Scaling (RSS), UEFI support, TCP Segmentation Offload (TSO), QoS tagging, Extended Message-Signaled Interrupts (MSI-X), UDP/IP offloading, TCP/IP checksum offload, RDMA over Converged Ethernet (RoCE), Virtual Extensible LAN (VXLAN), Network Virtualization using Generic Routing Encapsulation (NVGRE), RDMA over Converged Ethernet (RoCE) v2
Compliant Standards: IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.3ae, IEEE 802.1ab (LLDP), IEEE 802.3az, IEEE 802.1Qbb, IEEE 802.1Qaz, IEEE 802.1Qau, IEEE 802.1Qbg, IEEE 1588v2
Expansion & Connectivity
Interfaces: 2 x 25Gb Ethernet - SFP28
Processor / Memory
Processor: 1 x Mellanox ConnectX-4 Lx - Mellanox Technologies
Power
Power Consumption Operational: 9.7 Watt
Miscellaneous
Compliant Standards: FCC Class A certified, CISPR 22 Class A, ICES-003, EN55024, EN 60950-1, RoHS, ACA, cTUVus, BSMI Class A, VCCI Class A, EN 55022 Class A
Software / System Requirements
OS Required: SuSE Linux Enterprise Server 11, Microsoft Windows Server 2012, Oracle Solaris 11.1, Microsoft Windows Server 2012 R2, VMware ESXi 5.5, Ubuntu 14.04, Red Hat Enterprise Linux 7, Red Hat Enterprise Linux 6.6, Red Hat Enterprise Linux 7.1, Citrix XenServer 6.5, SuSE Linux Enterprise Server 12, Red Hat Enterprise Linux 6.7, Red Hat Enterprise Linux 7.2, VMware ESXi 6.0
Environmental Parameters
Min Operating Temperature: 41 °F
Max Operating Temperature: 140 °F
Humidity Range Operating: 5 - 95% (non-condensing)
Compatibility Information
This Dual Port Network Adapter is Designed for
HPE Apollo 4000 Series: 4200 Gen9, 4510 Gen10, 4510 Gen9, 4530 Gen9
HPE ProLiant DL Series: DL120 Gen9, DL120 Gen9 Entry, DL160 Gen9, DL160 Gen9 Base, DL160 Gen9 Entry, DL160 Gen9 Performance, DL180 Gen9, DL180 Gen9 Base, DL180 Gen9 Entry, DL180 Gen9 Storage, DL360 Gen10, DL360 Gen10 Base, DL360 Gen10 Entry, DL360 Gen10 High Performance, DL360 Gen10 Low, DL360 Gen10 Performance, DL360 Gen9, DL360 Gen9 Base, DL360 Gen9 CMS, DL360 Gen9 Entry, DL360 Gen9 Performance, DL360 Gen9 Special Server, DL380 Gen9, DL380 Gen9 Base, DL380 Gen9 Entry, DL380 Gen9 High Performance, DL380 Gen9 Performance, DL560 Gen10, DL560 Gen10 Base, DL560 Gen10 Entry, DL560 Gen10 Performance, DL560 Gen9, DL560 Gen9 Base, DL560 Gen9 Entry, DL560 Gen9 Performance, DL580 Gen9, DL580 Gen9 Base, DL580 Gen9 Database, DL580 Gen9 High Performance, DL580 Gen9 SAP HANA Scale-up Base Configuration
HPE ProLiant ML Series:ML350 Gen10, ML350 Gen10 Base, ML350 Gen10 Entry, ML350 Gen10 Performance, ML350 Gen10 Solution, ML350 Gen10 Sub-Entry
HPE ProLiant XL Series:XL230k Gen10 Compute Tray, XL250a Gen9, XL250a Gen9 Accelerator Tray, XL450 Gen10
HPE StoreEasy 1850, 3850 Gateway Single Node
or the rise in volume of mobile data and video and the frequency at which it is accessed, The HPE Ethernet 10/25Gb 2-port SFP28 CX4121B Adapter for select HPE ProLiant Server DL family of rack and HPE Apollo Servers delivers high-performance solutions. It allows Telco, services providers, financial institutions and enterprises to meet the demanding needs of more bandwidth.
Specifications
| Other features | |
|---|---|
| Harmonized System (HS) code | 85176990 |
| Operational conditions | |
| Storage relative humidity (H-H) | 5 - 95% |
| Operating relative humidity (H-H) | 10 - 90% |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 5 - 60 °C |
| Technical details | |
| Compliance certificates | RoHS |
| Performance | |
| Compatible products | HPE ProLiant DL120 Gen9 ServerHPE ProLiant DL160 Gen9 ServerHPE ProLiant DL360 Gen9 ServerHPE ProLiant DL360 Gen10 ServerHPE ProLiant DL380 Gen9 ServerHPE ProLiant DL380 Gen10 ServerHPE ProLiant DL385 Gen10 ServerHPE ProLiant DL560 Gen9 ServerHPE ProLiant DL580 Gen9 ServerHPE ProLiant ML350 Gen9 ServerHPE Apollo 2000 - XL1x0r Gen9 ServerHPE Apollo 4200 Gen9 ServerHPE Apollo 4500 – XL450 Gen9 ServerHPE Apollo 6000 – XL230a Gen9 ServerHPE Apollo 6000 – XL250a Gen9 ServerHPE Apollo 6500 – XL270d Gen9 Server |
| Design | |
| PCI Card form factor | Full-height (low-profile) |
| Component for | Server |
| Power | |
| Power consumption (typical) | 8.4 W |
| Antenna | |
| Quality of Service (QoS) support | Yes |
| Networking | |
| Jumbo frames support | Yes |
| LAN controller | Mellanox ConnectX-4 Lx EN |
| Networking standards | IEEE 802.1Q, IEEE 802.1Qaz, IEEE 802.1Qbb, IEEE 802.1Qbg, IEEE 802.1ab, IEEE 802.1ad, IEEE 802.1p, IEEE 802.3ae, IEEE 802.3au, IEEE 802.3az, IEEE 802.3x |
| Ethernet LAN data rates | 10000,25000 Mbit/s |
| Bandwidth | |
| Data transfer rate (max) | 25 Mbit/s |
| Ports & interfaces | |
| Fiber ports quantity | 2 |
| Fiber optic connector | SFP28 |
| PCI version | 3.0 |
| HDD interface | Ethernet / Fiber |
| Host interface | PCI Express |
| Internal | Yes |
| Connectivity technology | Wired |
Last viewed by you
€ 65,00
