PLEASE NOTE:
'REGISTERED ECC' / 'REGISTERED NON-ECC' (SERVER MEMORY) ARE NOT SUITABLE FOR USE IN CONSUMER PC / NOTEBOOK
Do you have a question? Please feel free to contact our Sales department
Disclaimer: Product photos and specifications are provided by Universal Databases and are often based on new products. Photos are indicative, SpareIT tries to show this as accurately as possible.
Please pay close attention to the product description and contact us if you have any questions.
Description
HPE 100Gb QSFP28 MPO SR4 100m. SFP transceiver type: Fiber optic, Maximum data transfer rate: 100000 Mbit/s, Interface type: QSFP28. Power consumption (typical): 3.5 W. Width: 72.7 mm, Depth: 8.5 mm, Height: 18.4 mm
What if you could deploy 100 Gb transceiver connections with an overall reduction of cost per bit? The HPE 100Gb QSFP28 Transceiver is designed to meet the increasing demand of growing bandwidth in the data center. The 100 Gb performance allows a reduction of the port density and number of hardware components required to achieve this higher speed. With reduction of cost per bit, The HPE 100Gb QSFP28 Transceiver can significantly reduce Capex and Opex spending on interconnect connections. When the fiber optic cable is attached via a standard MPO connector, up to 100m connection can be conducted via multi-mode fibers.
Features
- The HPE 100Gb QSFP28 MPO SR4 100m Transceiver has four optical lanes in each direction, allowing each to operate at 25 Gb.
- MPO connector for plugging in multi-mode fiber cables.
- Maximum link length of 70 m on OM3 and 100 m on OM4 multimode fiber at 100 Gb/s.
- Bit-error Rate (BER) lower than 10-15.
- 3.3 V power supply.
Specifications
Weight & dimensions | |
---|---|
Weight | 36.3 g |
Height | 18.4 mm |
Depth | 8.5 mm |
Width | 72.7 mm |
Operational conditions | |
Operating relative humidity (H-H) | 0 - 85% |
Storage temperature (T-T) | -40 - 85 °C |
Operating temperature (T-T) | 0 - 70 °C |
Power | |
Power consumption (typical) | 3.5 W |
Performance | |
Harmonized System (HS) code | 85369010 |
Maximum transfer distance | 100 m |
Wavelength | 850 nm |
Multi-mode fiber (MMF) supported | Yes |
SFP transceiver standard | SR4 |
SFP transceiver type | Fiber optic |
Networking | |
Fiber optic connector | MPO |
Interface type | QSFP28 |
Data transfer rate (max) | 100000 Mbit/s |