Cisco ASA5555-K9 hardware firewall 1U 2 Gbit/s
- ASA 5555-X with SW 8GE Data 1GE Mgmt AC 3DES/AES
- Our Refurbished products have been tested and are in A-grade condition (unless stated otherwise)
- Photos are indicative and may differ.
PLEASE NOTE:
'REGISTERED ECC' / 'REGISTERED NON-ECC' (SERVER MEMORY) ARE NOT SUITABLE FOR USE IN CONSUMER PC / NOTEBOOK
Do you have a question? Please feel free to contact our Sales department
Disclaimer: Product photos and specifications are provided by Universal Databases and are often based on new products. Photos are indicative, SpareIT tries to show this as accurately as possible.
Please pay close attention to the product description and contact us if you have any questions.
Description
Cisco ASA5555-K9. Firewall throughput: 2 Gbit/s, Maximum data transfer rate: 4 Gbit/s, VPN throughput: 0.7 Gbit/s. Heat dissipation: 458 BTU/h, Noise level: 67.9 dB. Security algorithms: 3DES, VPN support: 3DES/AES. Connectivity technology: Wired. Internal memory: 16384 MB
Problem Description
ASA 5500-X security appliances that shipped from March 16, 2012 through June 11, 2012 contain the incorrect factory default configuration. This requires the user to follow special procedures for system initialization.
Background
The ASA 5500-X appliances shipped from March 16, 2012 through June 11, 2012 were not loaded with the correct factory default configuration and must be initialized using special commands. The procedures contained in the Quick Start Guide are insufficient to properly initialize the affected units.
Problem Symptoms
Users attempting to initialize the affected ASA 5500-X appliances using the Quick Start Guide will observe that the management 0/0 ports are in the down/down condition. In addition, ASDM for on box management is not accessible.
Workaround/Solution
The factory default configuration can be applied using the following command:
config factory-default
Note that the ASA 5515-X appliance does not support the command above due to Cisco bug ID CSCtz73669. The unit must be restored to the factory default configuration using the command series shown below.
Specifications
| Weight & dimensions | |
|---|---|
| Weight | 7.63 kg |
| Dimensions (WxDxH) | 429 x 484 x 42.4 mm |
| Operational conditions | |
| Operating altitude | 0 - 3050 m |
| Non-operating altitude | 0 - 4572 m |
| Storage relative humidity (H-H) | 10 - 90% |
| Operating relative humidity (H-H) | 10 - 90% |
| Storage temperature (T-T) | -25 - 70 °C |
| Operating temperature (T-T) | -5 - 40 °C |
| System requirements | |
| Minimum flash memory | 8192 MB |
| Technical details | |
| Harmonized System (HS) code | 85176990 |
| Power | |
| Peak power | 134 W |
| Number of power supply units | 1 |
| Redundant power supply (RPS) support | Yes |
| Power consumption (typical) | 90 W |
| Input current | 15 A |
| AC input frequency | 50 - 60 Hz |
| AC input voltage | 100-240 V |
| Design | |
| Form factor | 1U |
| Rack mounting | Yes |
| Storage | |
| Solid-state drive capacity | 120 GB |
| Number of hard drives installed | 1 |
| Total storage capacity | 120 GB |
| RAID support | Yes |
| RAID levels | 1 |
| Storage media type | SSD |
| Memory | |
| Internal memory | 16384 MB |
| Ports & interfaces | |
| Serial ports quantity | 1 |
| USB 2.0 ports quantity | 2 |
| Gigabit Ethernet (copper) ports quantity | 6 |
| Connectivity technology | Wired |
| Security | |
| VPN support | 3DES/AES |
| Security algorithms | 3DES |
| Networking | |
| Number of VLANs | 500 |
| Performance | |
| Noise level | 67.9 dB |
| Concurrent connections | 1000000 |
| Heat dissipation | 458 BTU/h |
| Data transmission | |
| Maximum firewall connections per second | 50000 |
| Mobile VPN IPSec | 5000 |
| Mobile VPN SSL | 2 |
| IPS/IDS throughput | 1300 Mbit/s |
| VPN throughput | 700 Mbit/s |
| Firewall throughput | 2000 Mbit/s |
| Data transfer rate (max) | 4000 Mbit/s |
