HPE 526FLR-SFP+ Adapter Internal Ethernet 20000 Mbit/s
- FlexFabric 10Gb 2-port 526FLR-SFP+ Adapter
- Our Refurbished products have been tested and are in A-grade condition (unless stated otherwise)
- Photos are indicative and may differ.
PLEASE NOTE:
'REGISTERED ECC' / 'REGISTERED NON-ECC' (SERVER MEMORY) ARE NOT SUITABLE FOR USE IN CONSUMER PC / NOTEBOOK
Do you have a question? Please feel free to contact our Sales department
Disclaimer: Product photos and specifications are provided by Universal Databases and are often based on new products. Photos are indicative, SpareIT tries to show this as accurately as possible.
Please pay close attention to the product description and contact us if you have any questions.
Description
The HP FlexFabric 10Gb 2-port 526FLR-SFP+ Converged Network Adapter is a low cost, low power dual port PCIe v2.0 x8 lane adapter designed for use in HP ProLiant Gen8 rack and scalable servers. The HP 526FLR-SFP+ addresses the demanding needs of the next-generation data center by by combining the concurrent functionality of a NIC (Ethernet), iSCSI, and Fibre Channel onto a single converged network adapter reducing the number of adapters and cables; reducing acquisition and operational costs.
The ability to concurrently run LAN, iSCSI and FCoE traffic provides HP customers with flexibility and scalability; thus reducing the cabling and configuration complexities of multiple adapters. The HP 526FLR-SFP+ CNA enables connections with Direct Attach Copper cables as well as SR fiber optic modules.
The HP 526FLR-SFP+ supports networking features such as VLAN tagging, Low latency interrupts, TCP/IP checksum offloading, MSI-X, NIC teaming (bonding), RSS, WOL, jumbo frames and PXE boot.
Dual-port 10Gb CNA PCIe Gen 2.0 , x8 lane adapter designed for maximum network performance./b>
- 20 Gbps full duplex Ethernet transfer rate per port (40 Gbps aggregate), with SFP+ cages allowing use of Direct Attach copper and SR fiber optic modules
- Supports Wake-on-LAN (WOL), has PXE , MSI/MSI-X support, Teaming, IPv6
- Adapter supports HP Sea of Sensors 3D Technology
- New I/O technologies reduce system power, increases I/O performance and reduces I/O latency.
Specifications
| Operational conditions | |
|---|---|
| Operating relative humidity (H-H) | 10 - 90% |
| Operating temperature (T-T) | 0 - 55 °C |
| Power | |
| Power consumption (typical) | 20 W |
| Networking | |
| Networking standards | IEEE 802.1p, IEEE 802.1Q, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3x |
| Ethernet LAN | Yes |
| Bandwidth | |
| Full duplex | Yes |
| Data transfer rate (max) | 20000 Mbit/s |
| Ports & interfaces | |
| Ethernet LAN (RJ-45) ports | 2 |
| HDD interface | Ethernet |
| Host interface | PCI Express |
| Internal | Yes |
| Connectivity technology | Wired |
