Added to cart
    Continue shopping »

    HPE J2000 disk array Rack (2U)

    € 2.000,00 Excl. VAT
    Available immediately
    Part number: R4T20A
    • J2000 Dual IOM 2x100GbE NVMe-oF SFF TAA-compliant JBOF Storage
    • Our Refurbished products have been tested and are in A-grade condition (unless stated otherwise)
    • Photos are indicative and may differ.

    Disclaimer: Product photos and specifications are provided by Universal Databases and are often based on new products. Photos are indicative, SpareIT tries to show this as accurately as possible.
    Please pay close attention to the product description and contact us if you have any questions.


    Description

    HPE J2000. Chassis type: Rack (2U). Device class: Small & Medium Business. Number of storage drives supported: 24, Supported storage drive types: SSD, Storage drive sizes supported: 2.5". Width: 442 mm, Depth: 682 mm, Height: 87 mm, Weight: 25.5 kg

    Do your applications need the performance of NVMe SSDs, but are limited by your server infrastructure?

    HPE Flash Enclosures are all flash storage systems designed to deliver high performance with consistently low latencies for enterprise workloads such as AI, Big Data, HPC, SDS, and M&E.
    The HPE J2000 is an end-to-end NVMe platform that supports up to 24 NVMe SSDs connected through either two or six 100GbE NVMe-oF Ethernet ports. Designed for shared environments, the HPE J2000 provides a high availability (HA) architecture with its dual IO Modules in an active/active configuration, the use of dual port NVMe SSDs allowing each IO Module to access all the SSDs in the system, and hot swap redundant components including IOMs, power supplies and cooling fans. The HPE J2000 redefines DAS with greater performance and flexibility than traditional solutions and is a building block for software-defined storage, cloud storage, and Composable Infrastructure solutions going forward.

    Features

    High Performance with Very Low Latency
    - HPE Flash Enclosures are an end-to-end NVMe solution with a non-blocking architecture in a PCI Gen4 ready chassis.
    - Up to six 100GbE NVMe-oF ports providing the capability of up to 16.8M IOPs and 69 GB/s performance using 4K random reads.
    - RoCE v2 connectivity adds only 4.85us of latency compared to internal PCIe SSDs.
    - Remote Direct Memory Access (RDMA) reduces server CPU resources needed for applications to access data.

    Network Connected Solution delivers Shared Efficiencies
    - The HPE J2000 Flash Enclosure improves the utilization of flash in the environment and facilitates Data Sharing (via NVMe Namespaces).
    - Increase the availability of data with an HA design and NVMe-oF network connectivity.
    - Deliver better Total Cost of Ownership (TCO) when compared to distributed and isolated internal SSDs.
    - Reduce rack space and overall power requirements.

    High Available (HA) Architecture
    - The HPE J2000 Flash Enclosure features hot swap, dual IO modules in an active-active configuration with hot swap, redundant power, and cooling.
    - Each IO module has its own management interface while providing a single view of the entire system.
    - Dual port SSDs allow access to data from either or both IO modules for performance and availability.
    - Multipath support provides applications with improved fault tolerance.

    Warranty: Three-year limited parts only warranty, including hardware diagnostic support, pre-failure warranty (coverage of solid state drives). The warranty is fully supported by HPE Services and a worldwide network of resellers and service providers. In addition, 90-day's getting started software telephone support may be covered under the warranty or available for an additional fee. Enhancements to warranty services are available through HPE Pointnext operational services.


    Specifications

    Other features
    Insight manager support No
    SAN backup support No
    Storage mirroring No
    Weight & dimensions
    Weight 25.5 kg
    Height 87 mm
    Depth 682 mm
    Width 442 mm
    System requirements
    Linux operating systems supported Yes
    Performance
    Device class Small & Medium Business
    Design
    Chassis type Rack (2U)
    Ports & interfaces
    Host ports 2
    USB connectivity No
    Storage
    Storage drive sizes supported 2.5"
    Maximum supported storage capacity 307 TB
    Number of storage drives supported 24
    Supported storage drive types SSD
    Installed storage drive type No
    Storage drives installed No
    Show more

    Kempenbaan 34
    5121 DM Rijen
    The Netherlands

    P. +31 (0)161 22 61 41
    E. info@spareit.nl

    CoC. 18080985
    VAT. NL8152.36.700.B01

    Subscribe for our newsletter

    Stay informed through our newsletter